Call today0800 65 22 678

Twitter feed

Wise Basement SystemsWise Knotweed SolutionsWhite PreservationTimberwise

Positive pressure ventilation

Ask a question

The ultimate in condensation treatment, our positive pressure ventilation system is designed to provide a reliable solution to condensation, black mould and air quality issues within the whole property; ensuring that damp, stale air does not have an opportunity to fester within a home.

How positive pressure ventilation works

The positive pressure ventilation system draws in fresh air that is filtered and dried at an ambient temperature. This dry air is then gently introduced into the property continuously creating positive pressure by diluting and displacing the stale, moist air that would cause condensation and black mould issues within the property.

Why positive pressure ventilation unit may be required

condensation black mouldLack of adequate ventilation and modern occupancy styles can lead to a build up of excessive humidity and moisture. This poor indoor air quality can lead to serious health issues for asthma and allergy sufferers and those with breathing difficulties.

 

 

The benefits of positive pressure ventilation

  • Very quiet operation
  • 5 year guarantee
  • Lower energy costs - keeping with Government directive regarding energy efficient appliances
  • Alleviates condensation
  • Alleviates black mould
  • Reduces radon
  • Low maintenance
  • Special large capacity filter to ensure maximum ventilation
  • System operates at 100% efficiency even if the filter becomes 70% blocked

Types of positive pressure ventilation units

Two versions of our positive pressure systems are available. Depending on the type of property really determines the best systems for you. They are either mounted in the loft or for flats and apartments in the central hallway.

Loft installation - positive pressure system

Loft Installation - positive pressure ventilation

A loft unit is fitted in the roof void and ducted via an air diffuser, normally mounted in the ceiling above a stairwell. For units fitted with pre heat facility, the heater control switch is sited on the landing wall at a convenient height to enable the user to switch the heater on or off. Also, the fan speed control is set from this position.



Flatmaster - Positive pressure system

Hallway installation - positive pressure ventilation

The flat unit is fitted on a convenient wall, as close to the intake point as possible. Ideally, the unit should be fitted inside a hall cupboard, where access to an external wall and ambient air is possible. Supply ducting is then run to an outlet air grille, normally situated in the hall, in order that the introduced air is delivered to a central point within the dwelling.

Additional information on positive pressure ventilation systems

  • Energy efficient - consumes as low as 6 watts
  • Robust construction
  • Pre heat can be manually selected
  • Electronic controller automatically monitors temperature of introduced air and activates pre heat to maintain comfort levels.
  • DC motor for quiet operation
  • Diffusers designed to minimise draughts
  • Electronic feedback to the motor ensures constant flow rate
  • Four air volume speed settings
  • Air temperature cut out when incoming air temperature exceeds 25°C
  • Blocked filter indication light

Contact us about our positive pressure ventilation systems

To find out more about our positive pressure ventilation system, email us using our contact form.

Alternatively you can call us on 0800 65 22 678 or find your local branch and speak to one of our specialists.


     
Positive pressure ventilation - contact Wise Property Care0800 65 22 678

Other ventilation and condensation treatment options

Unsure if the positive pressure system is right for you? Visit our alternative condensation and black mould solutions below: